TM SIWA 3 – GT 1030 – 22inch Monitor

USER MANUAL

About this manual

This manual provides information about setting up your Tech-Magnet SIWA 3 PC. Please carefully go through the following steps:

Setting up your system

Read and follow all instructions in the documentation before you operate your system.

Safety information:

  • Set up the system on a stable surface.
  • Do not use this product near water or a heated source such as a radiator.
  • If you use an extension cord, ensure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.
  • If any of the items is damaged or missing, contact our support team immediately.
  • The Tech-Magnet SIWA 3 PC and it’s accessory illustrations is for reference only. Actual product specifications may vary with models.

The devices mentioned as (optional) will vary depending on the order description.

 

Package contents

Tech-Magnet SIWA 3 PC

MTG Monitor

Monitor Cord

RGB Keyboard

RGB Mouse

RGB Headphones

Tech-Magnet SIWA 3 PC

Power Adapter (Monitor)

Power Adapter (Monitor)

LED Panel Remote

MTG Webcam

USB Wi-Fi Adapter

NOTE:

  • Please note that the PC and Its accessories varies with the order that you have placed on our website.
  • Please call our support team if you have any questions or concerns regarding the PC or the order.
  • Refer to the last page for the contact details.

Hardware Setup

Front View:

Positioning your SIWA 3 PC Monitor

  • Place your Tech-Magnet SIWA 3 PC on a flat surface such as a table or desk.
  • Tilt the display to an angle between -5° to 20°.

IMPORTANT: Use both hands when setting up your TECH-MAGNET SIWA 3 PC.

Avoid adjusting the display to an angle beyond the recommended values or you may risk damaging the TECH-MAGNET SIWA 3 PC

  1. Power Button: This button is to power on your SIWA 3 PC.
  2. Audio Input: This port is used to connect your microphones.
  3. Audio Output: Audio in or line-in is a 3.5mm jack which enables users to connect to an external audio device like speakers.
  4. USB 2.0: This USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, flash disk drives, external HDDs, speakers, cameras and printers.

REAR VIEW:

  1. HDMI Port: This port allows you to connect your Tech-Magnet SIWA 3 PC to another HDMI-compatible device for file sharing or extending your display monitor. (This port is disabled as there is a graphics card for connecting to the display device).
  2. VGA Port: This port allows you to connect your Tech-Magnet SIWA 3 PC to another Display Port-compatible device for file sharing or extending your display monitor. (This port is disabled as there is a graphics card for connecting to the display device).
  3. USB 2.0: This USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, flash disk drives, external HDDs, speakers, cameras and printers.
  4. Audio Input: This port is used to connect your microphones.
  5. Display Port: This Display port is to connect your Tech-Magnet SIWA 3 PC to another Display Port-compatible device for file sharing or extending your display monitor.
  6. Power Input: The bundled power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Tech-Magnet SIWA 3 PC. To prevent damage to the PC, always use the bundled power adapter.
  7. Ethernet/LAN Port: This 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.
  8. Audio Output: Audio in or line-in is a 3.5mm jack which enables users to connect to an external audio device like speakers.
  9. HDMI Port: This port allows you to connect your Tech-Magnet SIWA 3 PC to another HDMI-compatible device for file sharing or extending your display monitor.

Note:

  • The below setup for the wireless keyboard and mouse is for the orders that comes with the wireless keyboard and mouse.

Connecting the wireless keyboard and mouse(Optional)

  1. Install batteries into the wireless keyboard and mouse.

Note: We recommend using new batteries for best performance.

2. Connect the wireless dongle for keyboard and mouse to a USB port to automatically pair both devices to your Tech-Magnet SIWA 3 PC.

3. You can begin using the wireless keyboard and mouse.

Note:

  • Reconnect the wireless keyboard and mouse with the wireless dongle if they lose connection. Avoid using either device alongside other wireless devices. Position the mouse and keyboard at least 20 cm away from other wireless hardware to avoid interference.
  • The illustrations above are for reference only. Actual hardware and specifications of the optional wired or wireless keyboard and mouse may vary.

Connecting to wireless networks

Wi-Fi

Access emails, surf the Internet, and share applications via social networking sites using your Tech-Magnet SIWA 3 PC’s Wi-Fi connection.

  1. Plug in the Wi-Fi adapter

Insert your Wi-Fi adapter into an open USB port on your computer. The adapter provides the best performance in a USB 3.0 port but is also compatible with a USB 2.0 or USB 1.1 port.

  1. Connecting Wi-Fi

Connect your Tech-Magnet SIWA 3 PC to a Wi-Fi network by using the following steps:

  • Click/Tap the Wi-Fi icon from the taskbar to enable Wi-Fi
  • Select an access point from the list of available Wi-Fi connections.
  • Select Connect to start the network connection.

Note: You may be prompted to enter a security key to activate the Wi-Fi connection.

Bluetooth

Use Bluetooth to facilitate wireless data transfers with other Bluetooth- enabled devices.

Pairing with other Bluetooth-enabled devices

You need to pair your Tech-Magnet SIWA 3 PC with other Bluetooth-enabled devices to enable data transfers. Connect your devices by using the following steps:

  • Launch Settings from the Start menu.
  • Select Devices > Bluetooth to search for Bluetooth-enabled devices. (for Windows 10)

Select Bluetooth & devices > Add device to search for Bluetooth-enabled devices. (for Windows 11).

  • Select a device from the list to pair your Tech-Magnet All- in-One PC with the device.

NOTE: For some Bluetooth-enabled devices, you may be prompted to key in the passcode of your Tech-Magnet All-in- One PC.

Connecting to wired networks

You can also connect to wired networks, such as local area networks and broadband Internet connection, using your TECH-MAGNET SIWA 3 PC’s LAN port.

Appendices

Notices

Federal Communication Commission Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.

Manufacturer Information:

Manufacturer

Tech-Magnet

Address

1401 Brighton Ct Southlake TX 76092 US

Authorized Representative in US

Tech-Magnet

Address

8633 S 208th St KENT WA 98031 US

(214) 628-0805

Contact Information:

Technical Support: +1 (214) 628-0805

Technical Support Email: support@tech-magnet.com